S3 Series features illustrate

1. The light will be off after 30S when the sensor light is turned on. PIR (Visible Plate Light Extinguished)

2. After the boot sensor light is on for 30S, it enters the backlight 5% output. PIR (Visible Plate Light Extinguished)

The power on sensor light turns off after 30S. (The light can be turned off at the end of 30S, with over-discharge protection)

4. After the power on induction light is on for 30S, it enters the backlight 5% output. PIR (can see the light on the board and other 30S end light off, with over-discharge protection and over-charge protection)

5. Press the switch for the first time to turn on the induction light for 30S and then the light is off, press the switch for the second time to turn on the induction light for 30S and enter the backlight 5% output, and press the switch for the third time to turn on the light 5% brightness output. Cyclic PIR (with over-discharge protection and over-charge protection)

6. The light will be off after 30S when the power on sensor light is on. Microwave model (can see the light extinguished)

7. After the power on sensor light is on for 30S, it enters the 5% output of the backlight. Microwave model (can see the light extinguished)

8. Press the switch for the first time to turn on the induction light for 30S and then turn off the light, press the switch for the second time to turn on the induction light for 30S and then enter the backlight 5% output, cycle. PIR can see the light and extinguish the plate, with over-discharge protection and overcharge protection)